Home Link vs CAR2U

Does your car program to your new garage door opener?

HomeLink is the in-vehicle system,

     made by Johnson Controls.

     It is identified by one red LED

     on the panel or mirror.  HomeLink

     The design may vary slightly per vehicle.In the rare case that you are having trouble synching your HomeLink® system to a new LiftMaster® garage door opener, our HomeLink® Repeater Kit is a simple solution to get you up and running quickly.

• Converts and accepts a non-compatible HomeLink® signal into a Security+ 2.0™ compatible signal
• Compatible with vehicles that are equipped with HomeLink®
• Can be programmed to work with more than one Security+ 2.0™ garage door opener
• Kit contains a repeater and a "learning" remote control

WHEN TO INSTALL A REPEATER KIT:

 All 2006 & Older vehicles require a repeater kit installation which must be purchased by the homeowner.

All 2007 and Newer vehicles – Perform regular HomeLink installation per vehicle instructions.  If after a complete attempt at installation the HomeLink does not program with opener, install a repeater.

INSTALL AND PROGRAM THE HOMELINK® REPEATER

1. Program the new remote control included with the HomeLink® Repeater Kit to the Homelink® 

button in your vehicle. Refer to the owner’s manual for your vehicle for programming steps.

2. Plug the HomeLink® Repeater into a 120 Vac polarized outlet,located as close as possible to 

your garage door opener.

3. Straighten the antenna. 

4. Press and release the Learn button on the garage door opener. The Learn LED will glow steadily.

5. Within 30 seconds press and hold the programmed HomeLink® button in your vehicle.

6. Release the HomeLink® button when the garage door opener light blinks. If light bulbs are 

not installed in the garage door opener, two clicks will be heard. Programming is complete.

7. To ensure the garage door opener operates from the HomeLink® button, press the 

programmed HomeLink® button in the vehicle. If it does not operate the garage door opener, 

repeat the steps.

QUICK FACTS

       

1. Install ONE repeater per HOME
2. Use different HomeLink buttons in vehicle if programming multiple cars, button 1 first car, button 2 second car… etc.
3. The garage door HomeLink remote is NOT a garage door opener
4. If you are using the HomeLink® Repeater with a garage door opener that has a Battery Backup system, ensure the original remote control is programmed to the garage door opener and place it in your glove box for use in the event of a power outage.
6. The remote control included in this Repeater Kit MUST be kept for future programming (i.e. a new vehicle, a new garage door opener, etc.)

To purchase one $39.95 + $6.95 Shipping & Handling

Lear Car2U® Repeater KiT

The Car2U® Repeater Kit is designed to allow compatibility between a new Chamberlain, Sears Craftsman, or Lift Master* garage door opener and the Car2U® system in your vehicle. Refer to your vehicle owner's manual for specific instructions on programming the Car2U® system. Your model may look different than illustrated in this programming guide


The installation is exactly the same as the Home Link SEE INSTRUCTIONS ABOVE

CHECK YOUR CAR OWNERS MANUAL TO SEE IF YOU NEED HOME LINK OR CAR2U

To purchase one $39.50 + Shipping & Handling